Specification
Range : LOW : 0-1999us / cm
HI 0-10.00ms / cm
Resolution : LOW :1us / cm
HI 0.01ms / cm
Accuracy : + 2 % F.S
Battery : 4 * 1 . 5V (not included)
Temperature Compensation : 0℃-50℃
Operating Temperature : 0℃-50℃
Dimensions : 215X 50X28 mm
Weight : 70g
Operating
1 . Remove the protective cap.
2 . Wash electrodes in distilled water, anddry it by filter paper.
3 . Turn on by " " switch.
4 . Put electrode into liquid which is to betest, and stir lightly, Wait until thedigital is stable, Slide the "ms / us" switch to
ms " or us ", read the finalvalue.
5 . After use, wash electrodes, put onprotective cap.
Important Note
1 . While testing please stir electrodesavoid the bubbleson it, Else it will affect the result.
2 . If the error is too big or EC value is notgoing back to 0 dip EC electrode into ethyl alcohol andshake for 5-10 seconds to
wash the electrode.
