Model: FSH-2A
Speed: 22000rpm
Large homogenizer knife: 8000-18000 rpm
Small homogenization knife: 8000-20000 rpm
Power: 185W
Voltage: 220V 50Hz
Weight: 7kg
Size: 270*170*370mm
Package Size: 300×250×400mm
Instructions：
The instrument should be placed on a level work surface, and the homogenization knives required for installation must be in place. When turning on the power to test the machine, first use a cup or utensil filled with water to submerge the plum knife head in the water. Turn on the power switch. Adjust the speed knob quickly, and there is no obvious metal friction sound (if there is metal friction sound, turn off the power, loosen the tool 6M/M supporting screw, turn the outer fixing sleeve randomly to install it in place, and then tighten it). . Cut the plants or microorganisms to be tested into small pieces or pieces, put them in the supplied glassware, clamp them in the middle of the magnet bracket (seven-shaped), loosen the 8M/M fixing screws of the fixed motor base, and slowly align them Move the mouth of the vessel down so that the homogenization head is 2-3mm away from the bottom of the vessel, and then tighten the 8M/M screws.
