Gas Detector Flammable Natural Gas Leak Detector Gas Analyzer High Sensitivity Gas Leaking Location Tester Sound Light Alarm

Brand name

 SMART SENSOR

 Color:

 Red + Black

 Material:

 ABS Plastic

 Detection Gas:

 Combustible Gas

 Sensitivity:

 Variable, 50 PPM (methane)

 Alarm Mode:   

 sound alarm and light alarm

 Response Time:

 Instantaneous

 Warm-Up Time:  

 < 20 Seconds

 Battery Type:

 3 * AA 1.5V Alkaline Batteries (NOT Included)

 Duty Cycle:

 3 Years

 Response Time: 

 Instantaneous

 Continuous Operation Time:

 9 hours(slightly vary with working condition)

 Probe Length:

 35.5cm / 13.98in

 Operating Temperature:                                       

 0~50℃, Relative Humidity 0~80%

 Storage Temperature:

 10~60℃, Relative Humidity: 0~70%

 Item Size: Approx.

 160 * 65 * 33mm / 6.30 * 2.56 * 1.30in (L * W * H)

 Item Weight: Approx.

 175g / 6.17oz

 Package Size: Approx.

 23.5 * 14 * 4cm / 9.25 * 5.51 * 1.57in (L * W * H)

 Package Weight:

 Approx. 214g / 7.56oz

1. Turn the unit off and the sensitivity knob fully counter clockwise.

 2. Turn the unit on in a non-contaminated atmosphere by slide the switch to ON, the power indicator will be lit. Power indicator keep on light show the battery power is sufficient, it ensure the unit precise detection.

 3. After turn on, the unit will auto warm-up within 20 sec, a ticking sound will be heard.

 4. Adjust the sensitivity control until the first leak indicator light up, the ticking speed up.

 5. Approached the sensor to a known leak source, the leak size indicate lights will increase with the rapid ticking. Above steps to ensure the unit working correctly, now the unit are ready to use. If the battery power in sufficient state but the sensor approach a known leaks without any responds, do not use the instrument, please return for repair.

 6. In conjunction with the increased tick rate, the leak size indicator will light from down to top as a larger combustible concentrations.

 7. Search the general area of the leak. When a detectable compound enters the sensor, the ticking speed up.

 8. If you are searching for a heavy leak source, please lower the sensitivity in a clear air by turning the adjustable knob (until the leak size  indicator turn off).